old - refetching

SMP NoMMU Linux

I have been fiddling for quite something with Paulneja’s fork bank linux build (Github) for the ESP32S3. Its pretty good on its own, but it was single core linux and the other core runs ESP-IDF with WiFI and flash functions. So with a lot of AI efforts and references from Apache Nuttx for ESP32S3 I was able to get SMP Linux working on ESP32S3 with fork bank along with WiFi. Will be putting up a release link soon once I am done with all the testing. I have also got USB Host working. GDMA is in progress but still remains pending for peripherals. Here’s a small snippet:

root@arduino:# uname -a

Linux arduino 7.2.4-forkbank #1 SMP Sat Sep 5 00:00:00 UTC 2026 xtensa GNU/Linux

root@arduino:# lscpu

Architecture: xtensa

Byte Order: Little Endian

CPU(s): 2

On-line CPU(s) list: 0,1

Vendor ID: Tensilica

Model name: -

Model: Xtensa LX7.0.12

Thread(s) per core: 1

Core(s) per socket: 1

Socket(s): 2

BogoMIPS: 480.00

Flags: nmi debug ocd trax perf density boolean loop nsa minmax

sext clamps mac16 mul16 mul32 mul32h fpu s32c1i

root@arduino:# free

total used free shared buff/cache available

Mem: 7768 4776 2016 0 976 1928

root@arduino:# ifconfig

espsta0 Link encap:Ethernet HWaddr 34:85:18:7B:81:B8

inet addr:192.168.1.54 Bcast:192.168.1.255 Mask:255.255.255.0

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:499 errors:0 dropped:63 overruns:0 frame:0

TX packets:132 errors:0 dropped:2 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:50350 (49.1 KiB) TX bytes:7369 (7.1 KiB)

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

UP LOOPBACK RUNNING MTU:65536 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

root@arduino:# ping google.com

PING google.com (142.251.221.206): 56 data bytes

64 bytes from 142.251.221.206: seq=0 ttl=114 time=67.180 ms

64 bytes from 142.251.221.206: seq=1 ttl=114 time=196.730 ms

64 bytes from 142.251.221.206: seq=2 ttl=114 time=60.430 ms

64 bytes from 142.251.221.206: seq=3 ttl=114 time=63.869 ms

64 bytes from 142.251.221.206: seq=4 ttl=114 time=68.288 ms

^C

— google.com ping statistics —

5 packets transmitted, 5 packets received, 0% packet loss

round-trip min/avg/max = 60.430⁄91.299⁄196.730 ms

root@arduino:# cat /proc/cpuinfo

CPU count : 2

CPU list : 0-1

vendor_id : Tensilica

model : Xtensa LX7.0.12

core ID : LX7_ESP32_S3_MP

build ID : 0x90f1f

config ID : c2f0fffe:23090f1f

byte order : little

cpu MHz : 240.00

bogomips : 480.00

flags : nmi debug ocd trax perf density boolean loop nsa minmax sext clamps mac16 mul16 mul32 mul32h fpu s32c1i

physical aregs : 64

misc regs : 4

ibreak : 2

dbreak : 2

perf counters : 2

num ints : 32

ext ints : 26

int levels : 6

timers : 3

debug level : 6

icache line size: 4

icache ways : 1

icache size : 0

icache flags :

dcache line size: 16

dcache ways : 1

dcache size : 0

dcache flags :

load/store exceptions : 6202204

load/store clock count : 854516361

root@arduino:# espctl system info

kernel: Linux 7.2.4-forkbank

machine: xtensa

board: Arduino Nano ESP32

vendor: Arduino

soc: Espressif ESP32-S3

uptime: 685 s

mem total: 7768 KB

mem free: 2044 KB

gpio: /dev/gpiochip2 (esp32s3-gpio, 49 lines)

pins: 30 names (built-in)

cpu freq: 240.00 MHz

temp: 30.4 C

root@arduino:#

AutoModerator
1 | 6 days ago